For outputs of 1000 to 2000 Kr/hr
The mid-sized, electrically heated continuous tempering ovens deliver high outputs at high efficiency and are robust in construction. Energized by a combination of efficient heating and high-speed processing, these rapid tempering ovens and rapid stress relieving ovens ensure your process is competitive, with minimal maintenance for a worry-free operation!ā
Features & Specifications
| Model | P-1611E | P-1615E |
|---|---|---|
| Chamber size (WxLxH) | 405 x 3455 x 150 | 405 x 4575 x 150 |
| Overall size (WxL) | 1220 x 4575 | 1220 x 5795 |
| Capacity/hour | 310Ā°C, 1535kg |Ā 370Ā°C, 1210kg |Ā 420Ā°C,Ā 1000kg | 310Ā°C, 1895kg |Ā 370Ā°C, 1490kg |Ā 420Ā°C,Ā 1225kg |
| Power | 96 KW | 120 KW |
*Higher output available
Special Applications ā Ā Tempering of Induction Hardened Parts, Tempering of Crankshafts
Applications
Stress Relieving
Wire form products have a very wide variety of forms and applications. The uniform structure is a critical feature in every part of the product. In high-volume production, long heat-treatment time often causes bottlenecks in the production process. Reducing the time required for stress relief can make a huge difference. Pyro ovens provide the solution.
Tempering
High-speed tempering of axle shafts is another great example of Pyro precision tempering. Pyro installed three systems with two global manufacturers, producing over 1 million axle shafts annually. In one case, a mezzanine-mounted monorail trolley conveyor tempering oven at 100-minutes cycle time and 350 parts in-process were replaced with a floor-mounted 20-minute tempering process with only 70 parts in-process. Potential applications for this technology are almost infinite. Pyromaitre has made its mark on the automobile industry.
More about Medium Electric Continuous Furnace
Ā» Springs
Ā» Suspension springs
Ā» Torsion springs
Ā» Wire forms
Ā» Valve springs
Ā» CV Joints
Ā» Leaf Springs
Ā» Shafts
Ā» Torsion tubes
Ā» Crankshafts
Ā» Induction hardened parts
Ā» Springs
Ā» Suspension springs
Ā» Torsion springs
Ā» Wire forms
Ā» Valve springs
Ā» CV Joints
Ā» Leaf Springs
Ā» Shafts
Ā» Torsion tubes
Ā» Crankshafts
Ā» Induction hardened parts