Pre-Sintering Furnaces by Therelek
Horizontal Vacuum Furnace
![](https://www.therelek.com/wp-content/uploads/2020/05/Horizontal-Vacuum-Furnace-therelek-featured-300x300.jpg)
Our Horizontal Vacuum Furnace has cold wall construction with metallic/graphite hot zone. The door swivels sideward and the material is loaded from the front.
![](https://www.therelek.com/wp-content/uploads/2020/05/Horizontal-Vacuum-Furnace-therelek-featured-300x300.jpg)
Continuous Mesh Belt Furnace
![](https://www.therelek.com/wp-content/uploads/2020/05/continuous-mesh-belt-furnace-therelek-featured-300x300.jpg)
A multi-zone control environment is present in a continuous high-temperature furnace, often with a single pre-heating zone,
![](https://www.therelek.com/wp-content/uploads/2020/05/continuous-mesh-belt-furnace-therelek-featured-300x300.jpg)
Chamber Furnace
![](https://www.therelek.com/wp-content/uploads/2017/10/chamber-furnace-300x300.jpg)
Therelek’s chamber furnace can operate up to 1800°C. These furnaces are usually rugged, refractory based construction
![](https://www.therelek.com/wp-content/uploads/2017/10/chamber-furnace-300x300.jpg)
Bogie Hearth Furnace
![](https://www.therelek.com/wp-content/uploads/2016/10/bogie-hearth-furnace-300x300.jpg)
Our standard bogie hearth furnace goes up to 1500°C, however, we make custom designed furnaces for any special requirements
![](https://www.therelek.com/wp-content/uploads/2016/10/bogie-hearth-furnace-300x300.jpg)
Continuous Pusher Furnace
![](https://www.therelek.com/wp-content/uploads/2020/06/Continuous-Pusher-Furnace-therelek-featured-300x300.jpg)
Therelek’s standard pusher type continuous furnace operate up to 1800°C. Higher temperature requirements are also encouraged which require process-specific design.
![](https://www.therelek.com/wp-content/uploads/2020/06/Continuous-Pusher-Furnace-therelek-featured-300x300.jpg)